Product Description:
Split Film Yarn Woven Geotextile is a kind of cost-effective woven geotextile made from Polypropylene slit film yarns. This geotextile is now mainly used for reinforcment and separation application . If you are building a road , constructing a parking lot, stabilizing material staging areas or repairing/installing a gravel driveway, woven geotextile perform at a high level and save time and money. And in most cases, our woven geotextile offer an added advantage over any geogrid on separation function.
Specification:
PROPERTIES |
TEST METHOD |
UNIT |
NOMINAL VALUE |
Mass Per Unit Area |
ASTM D 5261 |
g/m2 |
280 |
Tensile strength, MD |
ASTM D 4595 |
kN/m |
60 |
Tensile strength, CD |
ASTM D 4595 |
kN/m |
35 |
Elongation, MD |
ASTM D 4595 |
% |
42 |
Elongation, CD |
ASTM D 4595 |
% |
25 |
Apparent Opening Size |
ASTM D 4751 |
mm |
0.41 |
Permittivity |
ASTM D 4491 |
sec-1 |
NA |
Water Flow Rate |
ASTM D 4491 |
l/min/m2 |
160 |
Trapezoidal Tear Strength |
ASTM D 4533 |
kN |
0.48 |
CBR Ejection Force |
ASTM D 6241 |
kN |
4.80 |
UV Resistance (% retained after 500 hours) |
ASTM D 4355 |
% |
70 |
ROLL DIMENSIONS |
|
|
|
Roll Width |
|
m |
5.85 |
Roll Length |
|
m |
100 |
Roll Weight |
|
Kg |
140 |
Product Function:
- Embankments reinforcement
- Earth reinforcement
- Soft soil stabilization
- Slop protection
- Road contruction
Package and Storage:
- Split film woven geotextiles are supplied on 4' cardboard cores and wrapped in black polyethylene sheeting .
- Geotextile can be folded to a suitable width if it's needed .
- All materials are stored indoors to protect them from exposure to UV.
Installation instructions:
STEP 1: PREPARE THE SUB-GRADE- Level and smooth out sub-grade. Clear site of sharp objects and large rocks that could puncture fabric during installation.
STEP 2: PLACE FABRIC - Place fabric on area smoothly and pull taut. Overlap 1.5 - 3 feet, depending on sub-grade strength. Anchor with anchor staples staples.
STEP 1: PREPARE THE SUB-GRADE - Back dump base material onto fabric. If fabric is damaged during installation, patch with an overlap of 3-4 feet.